Economics Working Papers 2025, 9(3):4-72 | DOI: 10.32725/ewp.2025.004277
Change Management in SMEs in the Industry 4.0 Era
- University of South Bohemia in České Budějovice, Faculty of Economics
The main aim of this paper is to evaluate whether the concept of Industry 4.0 influences current change management in small and medium-sized enterprises and what obstacles prevent its wider implementation. An online questionnaire survey was conducted in 2024 to collect data, with 203 respondents from small and medium-sized enterprises participating. The questionnaire focused primarily on topics related to the implementation of changes, awareness of Industry 4.0, and the identification of barriers to the further development of change management and modern technologies. The results show that systematic change management is often neglected in companies, and it was also found that this is particularly the case where the perception of the importance of Industry 4.0 is low. It was also found that companies with a functioning strategy are more successful in implementing change. Financial costs, insufficient employee qualifications, and employee resistance can be identified as important barriers, with these barriers particularly affecting small and micro enterprises. Factor analysis also found that the barriers can be grouped into two main categories. The research confirms that successfully managing change in the era of digitalization requires a systematic approach, management support, and knowledge of change management principles. The paper represents one phase of a broader research project.
Keywords: Change management, Industry 4.0, Small and medium-sized enterprises, Implementation, Czech Republic
JEL classification: L60, M10, O33
Published: October 22, 2025 Show citation
References
- AL-ALAWI, A. I., ABDULMOHSEN, M., AL-MALKI, F. M., MEHROTRA, A. 2019. Investigating the barriers to change management in public sector educational institutions. International Journal of Educational Management, 2019, vol. 33, no. 1, pp. 112-148. ISSN 0951-354X.
Go to original source... - ALTER, S. 2022. Understanding artificial intelligence in the context of usage: Contributions and smartness of algorithmic capabilities in work systems. International Journal of Information Management, 2022, vol. 67, Article 102392. ISSN 0268-4012.
Go to original source... - ANUPAMA, K., CHAUDHARY, P., LAKSHMI, T. 2023 Introduction of a Pilot Study. Online. International journal of ethics, trauma & victimology, 2023, vol. 9, no. 2, pp. 33-35. ISSN 2395-4272.
- APPELBAUM, S.H., CAMERON, A., ENSINK, F., HAZARIKA, J., ATTIR, R., EZZEDINE, R., SHEKHAR, V. 2017. Factors that impact the success of an organizational change: a case study analysis. Industrial and Commercial Training, 2017, vol. 49, no. 5, pp. 213-230. ISSN 0019-7858.
Go to original source... - BADI, S., NASAJ, M. 2023. Cybersecurity effectiveness in UK construction firms: an extended McKinsey 7S model approach. Engineering, Construction and Architectural Management, 2023, vol. 31, no. 11, pp. 4482-4515. ISSN 0969-9988.
Go to original source... - BAKIR, B., TYAS, A.A.W.P. 2024. The role of Change Management Strategies in preparing large organizations in the Globalization Era: Leadership, Communication, Information Technology, and employee participation in Business Dynamics. Jurnal Minfo Polgan, 2024, vol. 13, no. 1, pp. 469-480. ISSN 2797-3298.
Go to original source... - BALLUCK, J., ASTURI, E., BROCKMAN, V. 2020. Use of the ADKAR® and CLARC ® Change Models to Navigate Staffing Model Changes During the COVID-19 Pandemic. Nurse Leader, 2020, vol. 18, no. 6, pp. 539-546. ISSN 1541-4612.
Go to original source... - BELLANTUONO, N., NUZZI, A., PONTRANDOLFO, P., SCOZZI, B. 2021. Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature. Sustainability, 2021, vol. 13, no. 23, Article 12941. ISSN 2071-1050.
Go to original source... - BENEŠOVÁ, A., HIRMAN, M., STEINER, F., TUPA, J. 2019. Determination of Changes in Process Management within Industry 4.0. Procedia Manufacturing, 2019, vol. 38, pp. 1691-1696. ISSN 2351-9789.
Go to original source... - BERISHA, G., PULA, J. S. 2015. Defining Small and Medium Enterprises: a critical review. Academic Journal of Business, Administration, Law and Social Sciences, 2015, vol. 1, no. 1, pp. 17-28. ISSN 2410-3918.
- BLEICH, M. R., JONES-SCHENK, J., JONES-SCHENK, J. 2017. Fostering Personal Power During Change. The Journal of Continuing Education in Nursing, 2017, vol. 48, no. 8, pp. 343-344. ISSN 0022-0124.
Go to original source... - BREGMAN, L. 2019. Kübler-Ross and the Re-visioning of Death as Loss: Religious Appropriation and Responses. Journal of Pastoral Care & Counseling, 2019, vol. 73, no. 1, pp. 4-8. ISSN 1542-3050.
Go to original source... - BRIDGES, W., BRIDGES, S. 2009. Managing Transitions: Making the Most of Change. 3rd ed. Cambridge: Da Capo Lifelong Books. 192 p. ISBN 978-0738213804.
- BROCAL, F., GONZÁLEZ, C., KOMLJENOVIC, D., KATINA, P. F., SEBASTIÁN, M. A., et al. 2019. Emerging Risk Management in Industry 4.0: An Approach to Improve Organizational and Human Performance in the Complex Systems. Complexity, 2019, vol. 2019, no. 1, Article 2089763. ISSN 1076-2787.
Go to original source... - BRODEUR, J., DESCHAMPS, I., PELLERIN, R. 2023. Organizational changes approaches to facilitate the management of Industry 4.0 transformation in manufacturing SMEs. Journal of Manufacturing Technology Management, 2023, vol. 34, no. 7, pp. 1098-1119. ISSN 1741-038X.
Go to original source... - BUKOYE, O. T., EJOHWOMU, O., ROEHRICH, J., TOO, J. 2022. Using nudges to realize project performance management. International Journal of Project Management, 2022, vol. 40, no. 8, pp. 886-905. ISSN 0263-7863.
Go to original source... - BURIAN, P. 2014. Internet inteligentních aktivit. 1st ed. Praha: Grada, 2014. 336 p. ISBN 978-80-247-5137-5.
- BY, R. T. 2005. Organisational change management: A critical review. Journal of Change Management, vol. 5, no. 4, pp. 369-380. ISSN 1469-7017.
Go to original source... - CALDWELL, R. 2012. Systems Thinking, Organizational Change and Agency: A Practice Theory Critique of Senge's Learning Organization. Journal of Change Management, 2012, vol. 12, no. 2, pp. 145-164. ISSN 1469-7017.
Go to original source... - CASTELO-BRANCO, I., CRUZ-JESUS, F., OLIVEIRA, T. 2019. Assessing Industry 4.0 readiness in manufacturing: Evidence for the European Union. Computers in Industry, 2019, vol. 107, pp. 22-32. ISSN 0166-3615.
Go to original source... - CHAABI, M. 2022. Roadmap to Implement Industry 5.0 and the Impact of This Approach on TQM. Online. In HAMLICH, M., BELLATRECHE, L., SIADAT, A., VENTURA, S. (eds.) Smart Applications and Data Analysis: 4th International Conference, SADASC 2022 Marrakesh, Morocco, September 22-24, 2022 Proceedings. Cham: Springer Nature Switzerland, 2022. pp. 287-293. ISBN 978-3-031-20489-0.
Go to original source... - CHMIELEWSKA, M., STOKWISZEWSKI, J., MARKOWSKA, J., HERMANOWSKI, T. 2022. Evaluating Organizational Performance of Public Hospitals using the McKinsey 7-S Framework. BMC Health Services Research, 2022, vol. 22, no. 1, Article 7. ISSN 1472-6963.
Go to original source... - CIMINI, C., BOFFELLI, A., LAGORIO, A., KALCHSCHMIDT, M., PINTO, R. 2021. How do industry 4.0 technologies influence organisational change? An empirical analysis of Italian SMEs. Journal of Manufacturing Technology Management, 2021, vol. 3, no. 3, pp. 695-721. ISSN 1741-038X.
Go to original source... - CORDEIRO, G. A., ORDÓÑEZ, R. E. C., FERRO, R. 2019. Theoretical proposal of steps for the implementation of the Industry 4.0 concept. Brazilian Journal of Operations & Production Management, 2019, vol. 16, no. 2, pp. 166-179. ISSN 2237-8960.
Go to original source... - COX, A. M., PINFIELD, S., RUTTER, S. 2019. Extending McKinsey's 7S model to understand strategic alignment in academic libraries. Library Management, 2019, vol. 40, no. 5, pp. 313-326. ISSN 0143-5124.
Go to original source... - CZECH STATISTICAL OFFICE (a). n.d. Ekonomické subjekty podle převažující činnosti CZ-NACE. Available at: https://vdb.czso.cz/vdbvo2/faces/cs/index.jsf?page=vystup-objekt&z=T&f=TABULKA&skupId=3771&katalog=33695&pvo=ORG03&pvo=ORG03&str=v386&v=v7__KODAKT__571__1. [Accessed 2025, July 01].
- CZECH STATISTICAL OFFICE (b). n.d. Ekonomické subjekty podle počtu zaměstnanců. Available at: https://vdb.czso.cz/vdbvo2/faces/cs/index.jsf?page=vystup-objekt&z=T&f=TABULKA&skupId=3773&katalog=33695&pvo=ORG05&pvo=ORG05&str=v386&v=v7__KODAKT__571__1. [Accessed 2025, July 01].
- ČERVENÝ, L., SLOUP, R., ČERVENÁ, T., RIEDL, M., PALÁTOVÁ, P. 2022. Industry 4.0 as an Opportunity and Challenge for the Furniture Industry - A Case Study. Sustainability, 2022, vol. 14, no. 20, Article 13325. ISSN 2071-1050.
Go to original source... - DANYS, L., ZOLOTOVA, I., ROMERO, D., PAPCUN, P., KAJATI, E., et al. 2022. Visible Light Communication and localization: A study on tracking solutions for Industry 4.0 and the Operator 4.0. Journal of Manufacturing Systems, 2022, vol. 64, pp. 535-545. ISSN 0278-6125.
Go to original source... - DEMPSEY, M., GEITNER, L., BRENNAN, A., MCAVOY, J. 2022. A Review of the Success and Failure Factors for Change Management. IEEE Engineering Management Review, 2022, vol. 50, no. 1., pp. 85-93. ISSN 1937-4178.
Go to original source... - DE MORAES, C. R., CUNHA, P. R. 2023. Enterprise Servitization: Practical Guidelines for Culture Transformation Management. Sustainability, 2023, vol. 15, no. 1, Article 705. ISSN 2071-1050.
Go to original source... - DE OLIVEIRA VALÉRIO, K. G., DA SILVA, C. E. S., NEVES, S. M. 2020. Strategic systematic for software development in industry 4.0. Strategic Change, 2020, vol. 29, no. 5, pp. 517-529. ISSN 1086-1718.
Go to original source... - DINNO, A. 2015. Nonparametric Pairwise Multiple Comparisons in Independent Groups using Dunn's Test. The Stata Journal: Promoting communications on statistics and Stata, 2015, vol. 15, no. 1, pp. 292-300. ISSN 1536-8734.
Go to original source... - EBERT, P., FREIBICHLER, W. 2017. Nudge management: applying behavioural science to increase knowledge worker productivity. Journal of Organization Design, 2017, vol. 6, no. 1, Article 4. ISSN 2245-408X.
Go to original source... - ENDREJAT, P. C., BAUMGARTEN, F., KAUFFELD, S. 2017. When Theory Meets Practice: Combining Lewin's Ideas about Change with Motivational Interviewing to Increase Energy-Saving Behaviours Within Organizations. Journal of Change Management, 2017, vol. 17, no. 2, pp. 101-120. ISSN 1469-7017.
Go to original source... - ERRIDA, A., LOTFI, B. 2021. The determinants of organizational change management success: Literature review and case study. International Journal of Engineering Business Management, 2021, vol. 13, pp. 1-15. ISSN 1847-9790.
Go to original source... - FAGERLAND, M.W., HOSMER, D.W. 2017. How to test for goodness of fit in ordinal logistic regression models. The Stata Journal, 2017, vol. 17, no. 3, pp. 668-686. ISSN 1536-8734.
Go to original source... - FANTINI, P., PINZONE, M., TAISCH, M. 2020. Placing the operator at the centre of Industry 4.0 design: Modelling and assessing human activities within cyber-physical systems. Computers & Industrial Engineering, 2020, vol. 139, Article 105058. ISSN 0360-8352.
Go to original source... - FILEP. R. 2024. Change management steps among SMEs. Marketing & Menedzsment, 2024, vol. 58, no. 3, pp. 72-82. ISSN 2786-3395.
Go to original source... - FONSECA, L. M. 2018. Industry 4.0 and the digital society: concepts, dimensions and envisioned benefits. In Proceedings of the 12th International Conference on Business Excellence 2018, 2018 vol. 12, no. 1, pp. 386-397. ISSN 2558-9652.
Go to original source... - FRANKLIN, M. 2021. Agile Change Management: A Practical Framework for Successful Change Planning and Implementation. 2nd ed. London: Kogan Page, 2021. 304 p. ISBN 978-1-3986-0316-5.
- FRENCH, J. 2012. Designing and Using Surveys as Research and Evaluation Tools. Journal of Medical Imaging and Radiation Sciences, 2012, vol. 43, no. 3, pp. 187-192. ISSN 1939-8654.
Go to original source... - GAJDZIK, B., GRABOWSKA, S., SANIUK, S. 2021. A Theoretical Framework for Industry 4.0 and Its Implementation with Selected Practical Schedules. Energies, 2021, vol. 14, no. 4, Article 940. ISSN 1996-1073.
Go to original source... - GALLI, B. J. 2018. Change Management Models: A Comparative Analysis and Concerns. IEEE Engineering Management Review, 2018, vol. 46, no. 3, pp. 124-132. ISSN 0360-8581.
Go to original source... - GARCIA-MARTINEZ, L. J., KRAUS, S., BREIER, M., KALLMUENZER, A. 2023. Untangling the relationship between small and medium-sized enterprises and growth: a review of extant literature. International Entrepreneurship and Management Journal, 2023, vol. 19, no. 2, pp. 455-479. ISSN 1554-7191.
Go to original source... - GARG, J., JHA, S., SINGH, A. K., NOVAK, M., TRNAVČEVIČ, A. 2023. Investigating the reorientation in manufacturing firms through a dynamic of strategic shift: An exploratory study. Human Systems Management, 2023, vol. 42, no. 6, pp. 609-631. ISSN 0167-2533.
Go to original source... - GESK, T. S., LEYER, M. 2022. Artificial intelligence in public services: When and why citizens accept its usage. Government Information Quarterly, 2022, vol. 39, no. 3, Article 101704. ISSN 0740-624X.
Go to original source... - GHOBAKHLOO, M., IRANMANESH, M., FOROUGHI, B., TSENG, M.-L., NIKBIN, D., et al. 2023. Industry 4.0 digital transformation and opportunities for supply chain resilience: a comprehensive review and a strategic roadmap. Production Planning & Control, 2025, vol. 36, no. 1, pp. 61-91. ISSN 0953-7287.
Go to original source... - GONZÁLEZ, F., PARDO DEL VAL, M., REDONDO CANO, A. 2022. Systematic literature review of interpretative positions and potential sources of resistance to change in organizations. Intangible Capital, 2022, vol. 18, no. 2, pp. 145-165. ISSN 1697-9818.
Go to original source... - HARRISON, R., FISCHER, S., WALPOLA, R. L., CHAUHAN, A., BABALOLA, T., et al. 2021. Where Do Models for Change Management, Improvement and Implementation Meet? A Systematic Review of the Applications of Change Management Models in Healthcare. Journal of Healthcare Leadership, 2021, vol. 13, pp. 85-108. ISSN 1179-3201.
Go to original source... - HATOUM, M. B., NASSEREDDINE, H., BADURDEEN, F. 2021. Reengineering Construction Processes in the Era of Construction 4.0: A Lean-Based Framework. In ALARCÓN, L. F., GONZÁLEZ, V. A. (eds.) Proc. 29th Annual Conference of the International Group for Lean Construction. Lima: Pontificia Universidad Católica del Perú, 2021. pp. 403-412. ISBN 978-612-48025-4-6.
Go to original source... - HORVÁTH, D., SZABÓ, R. Z. 2019. Driving forces and barriers of Industry 4.0: Do multinational and small and medium-sized companies have equal opportunities? Technological Forecasting and Social Change, 2019, vol. 146, pp. 119-132. ISSN 0040-1625.
Go to original source... - HOUBEN, M. A. M., CAEKEBEKE, N., VAN DEN HOOGEN, A., RINGENIER, M., TOBIAS, T. J. et al. 2020. The ADKAR® change management model for farmer profiling with regard to antimicrobial stewardship in livestock production. Vlaams Diergeneeskundig Tijdschrift, 2020, vol. 89, no. 6, pp. 309-314. ISSN 0303-9021.
Go to original source... - HUSSAIN, S. T., LEI, S., AKRAM, T., HAIDER, M. J., HUSSAIN, S. H., et al. 2018. Kurt Lewin's change model: A critical review of the role of leadership and employee involvement in organizational change. Journal of Innovation & Knowledge, 2018, vol. 3, no. 3, pp. 123-127. ISSN 2444-569X.
Go to original source... - ILIYASU, E., ETIKAN, I. 2021. Comparison of quota sampling and stratified random sampling. Biometrics & Biostatistics International Journal, 2021, vol. 10, no. 1, pp. 24-27. ISSN 2378-315X.
Go to original source... - IVANKO, Š. 2013. Modern Theory of Organization. Ljubljana: University of Ljubljana. 199 p. Available at: https://www.researchgate.net/profile/Mohamed_Mourad_Lafifi/post/3D_printing_of_assembled_robot_models/attachment/5a440609b53d2f0bba4734b9/AS%3A576253069623297%401514400846622/download/128.pdf. [Accessed 2025, June 19].
- JAARON, A. A. M., HIJAZI, I. H., MUSLEH, K. I. Y. 2022. A conceptual model for adoption of BIM in construction projects: ADKAR as an integrative model of change management. Technology Analysis & Strategic Management, 2022, vol. 34, no. 6, pp. 655-667. ISSN 0953-7325.
Go to original source... - JAMBAL, T., STUCHLÝ, J. 2021. Analysis of Change in the Corporate Sphere of the Czech Republic. In CAHA, Z., RUSCHAK, M., VELKOVÁ, V. (eds.) International Conference on Entrepreneurial Competencies in a Changing World (ECCW 2020), SHS Web of Conferences, 2021, vol. 90, Article 01007. ISSN 2261-2424.
Go to original source... - JURIGOVA, Z. 2016. Tourism Industry Analysis with the Czech Republic as the Focal Point. Online. Procedia Economics and Finance, 2016, vol. 39, pp. 305-312. ISSN 2212-5671.
Go to original source... - JAVAID, M., HALEEM, A., SINGH, R. P., SUMAN, R., GONZALEZ, E. S. 2022a. Understanding the adoption of Industry 4.0 technologies in improving environmental sustainability. Sustainable Operations and Computers, 2022, vol. 3, pp. 203-217. ISSN 2666-4127.
Go to original source... - JAVAID, M., HALEEM, A., SINGH, R. P., SUMAN, R. 2022b. Enabling flexible manufacturing system (FMS) through the applications of industry 4.0 technologies. Internet of Things and Cyber-Physical Systems, 2022, vol. 2, pp. 49-62. ISSN 2667-3452.
Go to original source... - JENA, A., PATEL, S. K. 2023. A hybrid fuzzy based approach for industry 4.0 framework implementation strategy and its sustainability in Indian automotive industry. Journal of Cleaner Production, 2023, vol. 420, Article 138369. ISSN 0959-6526.
Go to original source... - JERMAN, A., BERTONCELJ, A., DOMINICI, G., PEJIĆ BACH, M., TRNAVČEVIĆ, A. 2020. Conceptual Key Competency Model for Smart Factories in Production Processes. Organizacija, 2020, vol. 53, no. 1, pp. 68-79. ISSN 1581-1832.
Go to original source... - JOSHI, A., KALE, S., CHANDEL, S., PAL, D. 2015. Likert Scale: Explored and Explained. British Journal of Applied Science & Technology, 2015, vol. 7, no. 4, pp. 396-403. ISSN 2231-0843.
Go to original source... - KAASINEN, E., SCHMALFUSS, F., ÖZTURK, C., AROMAA, S., BOUBEKEUR, M., et al. 2020. Empowering and engaging industrial workers with Operator 4.0 solutions. Computers & Industrial Engineering, 2020, vol. 139, Article 105678. ISSN 0360-8352.
Go to original source... - KACHIAN, A., ELYASI, S., HAGHANI, H. 2018. ADKAR Model and Nurses' Readiness for Change. Journal of Client-centered Nursing Care, 2018, vol. 4, no. 4, pp. 203-212. ISSN 2476-4132.
Go to original source... - KAPLER, M. 2021. Barriers to the implementation of innovations in information systems in SMEs. Production Engineering Archives, 2021, vol. 27, no. 2, pp.156-162. ISSN 2353-7779.
Go to original source... - KARASVIRTA, S., TEERIKANGAS, S. 2022. Change Organizations in Planned Change - A Closer Look. Journal of Change Management, 2022, vol. 22, no. 2, pp. 163-201. ISSN 1469-7017.
Go to original source... - KHAN, N. 2021 Introduction to Statistical Tests of Significance. Research & Reviews: Journal of Statistics, 2021, vol. 10, no. 2, pp. 17-22. ISSN 2278-2273.
- KHATTAK, A. N., SIAL, A. M. S., FAISAL, F. The Organization Development (OD) Models: The Benefits and Implication for Organizational Performance: Literature Review. ACADEMIA International Journal for Social Sciences, 2025, vol. 4, no. 1, pp. 1233-1246. ISSN 3006-6638.
Go to original source... - KOHNOVÁ, L., SALAJOVÁ, N. 2019. Industrial Revolutions and their impact on managerial practice: Learning from the past. Problems and Perspectives in Management, 2019, vol. 17, no. 2, pp. 462-478. ISSN 1727-7051.
Go to original source... - KOTTER, P. 2015. Vedení procesu změny: osm kroků úspěšné transformace podniku v turbulentní ekonomice. 2nd ed. Praha: Management Press, 2015. 228 p. ISBN 978-80-7261-314-4.i
- KOTZIAS, K., BUKHSH, F. A., ARACHCHIGE, J. J., DANEVA, M., ABHISHTA, A. 2022. Industry 4.0 and healthcare: Context, applications, benefits and challenges. IET Software, 2022, vol. 17, no. 3, pp. 195-248. ISSN 1751-8806.
Go to original source... - KUMAR HAJOARY, P. 2024. Strategic response to Industry 4.0 - an empirical analysis from a developing country perspective. Technology Analysis & Strategic Management, 2024, vol. 36, no. 12, pp. 4162-4175. ISSN 0953-7325.
Go to original source... - KUMP, B. 2023. Lewin's field theory as a lens for understanding incumbent actors' agency in sustainability transitions. Environmental Innovation and Societal Transitions, 2023, vol. 46, Article 100683. ISSN 2210-4224.
Go to original source... - LEE, B. K., ROVERS, M. 2016. From "Saving Satir" to "Evolving Satir." Social Work, 2016, vol. 61, no. 4, pp. 372-374. ISSN 0037-8046.
Go to original source... - LENART-GANSINIEC, R. 2019. Organizational Learning in Industry 4.0. Problemy Zarzadzania, 2019, vol. 2/2019, no. 82, pp. 96-108. ISSN 1644-9584.
Go to original source... - LI, C., REICHERT, M., WOMBACHER, A. 2011. Mining business process variants: Challenges, scenarios, algorithms. Data & Knowledge Engineering, 2011, vol. 70, no. 5, pp. 409-434. ISSN 0169-023X.
Go to original source... - LIM, W. M. 2025. What Is Quantitative Research? An Overview and Guidelines. Australasian Marketing Journal, 2025, vol. 33, no. 2, pp. 199-229. ISSN 1441-3582.
Go to original source... - LUNDBERG, L., GRAHN, H. 2022. Research Trends, Enabling Technologies and Application Areas for Big Data. Algorithms, 2022, vol. 15, no. 8, Article 280. ISSN 1999-4893.
Go to original source... - MADAKAM, S., RAMASWAMY, R. TRIPATHI, S. 2015. Internet of Things (IoT): A Literature Review. Journal of Computer and Communications, 2015, vol. 03, no. 05, pp. 164-173. ISSN 2327-5219.
Go to original source... - MAISIRI, W., DARWISH, H., VAN DYK, L. 2019. An Investigation of Industry 4.0 Skills Requirements. South African Journal of Industrial Engineering, 2019, vol. 30, no. 3, pp. 90-105. ISSN 2224-7890.
Go to original source... - MARINAGI, C., REKLITIS, P., TRIVELLAS, P., SAKAS, D. 2023. The Impact of Industry 4.0 Technologies on Key Performance Indicators for a Resilient Supply Chain 4.0. Sustainability, 2023, vol. 15, no. 6, Article 5185. ISSN 2071-1050.
Go to original source... - MARKOVA, P., HOMOKYOVA, M., PRAJOVA, V., HORVATHOVA, M. 2022. Disadvantaged Employees in Industry 4.0. MM Science Journal, 2022, vol. 2022, no. 4, pp. 6078-6085. ISSN 1803-1269.
Go to original source... - MARTIN, K., COLVILLE, I. 2017. 30 Change management theory that is fit for the times and fit for purpose: back to the future with kurt lewin. BMJ Leader, 2017, vol. 1, pp. A15.2-A15. ISSN 2398-631X.
Go to original source... - MAZURCHENKO, A., MARŠÍKOVÁ, K. 2019. Digitally-Powered Human Resource Management: Skills and Roles in the Digital Era. Acta Informatica Pragensia, 2019, vol. 8, no. 2, pp. 72-87. ISSN 1805-4951.
Go to original source... - MCHUGH, M. L. 2013. The Chi-square test of independence. Biochemia Medica, 2013, vol. 23, no. 2, pp. 143-149. ISSN 1846-7482.
Go to original source... - MCLAREN, T. A. S., VAN DER HOORN, B., FEIN, E. C. 2023. Why Vilifying the Status Quo Can Derail a Change Effort: Kotter's Contradiction, and Theory Adaptation. Journal of Change Management, 2023, vol. 23, no. 1, pp. 93-111. ISSN 1469-7017.
Go to original source... - MCROBERT, C. J., HILL, J. C., SMALE, T., HAY, E. M., VAN DER WINDT, D. A., et al. 2018. A multi-modal recruitment strategy using social media and internet-mediated methods to recruit a multidisciplinary, international sample of clinicians to an online research study. PLOS ONE, 2018, vol. 13, no. 7, Article e0200184. ISSN 1932-6203.
Go to original source... - MICHULEK, J., KRIŽANOVÁ, A. 2022. Analysis of Internal Marketing Communication Tools of a Selected Company in Industry 4.0 Using McKinsey 7S Analysis. Management Dynamics in the Knowledge Economy, 2022, vol. 10, no. 2, pp. 154-166. ISSN 2392-8042.
Go to original source... - MISHRA, P., PANDEY, C. M., SINGH, U., GUPTA, A., SAHU, C., et al. 2019. Descriptive statistics and normality tests for statistical data. Annals of Cardiac Anaesthesia, 2019, vol. 22, no. 1, pp. 67-72. ISSN 0971-9784.
Go to original source... - MOFOLASAYO A., YOUNG, S., MARTINEZ, P., AHMAD, R. 2022. How to adapt lean practices in SMEs to support Industry 4.0 in manufacturing. Procedia Computer Science, 2022, vol. 200, pp. 934-943. ISSN 1877-0509.
Go to original source... - MRNUŠTÍK KONEČNÁ, M., SUTHERLAND, L.-A. 2022. Digital innovations in the Czech Republic: developing the inner circle of the Triggering Change Model. The Journal of Agricultural Education and Extension, 2022, vol. 28, no. 5, pp. 577-600. ISSN 1750-8622.
Go to original source... - MRUGALSKA, B., AHMED, J. 2021. Organizational Agility in Industry 4.0: A Systematic Literature Review. Sustainability, 2021, vol. 13, no. 15, Article 8272. ISSN 2071-1050.
Go to original source... - MUDJISUSATYO, Y., DARWIN, D., KISNO, K. 2024. Change management in Independent Campus program: application of the ADKAR model as a change management competency constructor. Cogent Education, 2024, vol. 11, no. 1, Article 2381892. ISSN 2331-186X.
Go to original source... - MÜLLER, M. M., BÖHM, K. L., RENZ, E. 2023. Pay or nudge employees into change? A theoretical and experimental investigation of the effect of nudging for organizational change. Managerial and Decision Economics, 2023, vol. 44, no. 6, pp. 3666-3695. ISSN 0143-6570.
Go to original source... - NARWANE, V.S., RAUT, R.D., YADAV, V.S., SINGH, A.R. 2020. Barriers in sustainable industry 4.0: a case study of the footwear industry. International Journal of Sustainable Engineering, 2021, vol. 14, no. 3, pp. 175-189.
Go to original source... - ODEH, G. 2021. Implementing Mckinsey 7S Model of Organizational Diagnosis and Planned Change, Best Western Italy Case Analysis. Journal of International Business and Management, 2021, vol. 11, no. 4, pp. 1-8. ISSN 2616-4655.
- OLYA, H., KIM, N., KIM, M. J. 2024. Climate change and pro-sustainable behaviors: application of nudge theory. Journal of Sustainable Tourism, 2024, vol. 32, no. 6, pp. 1077-1095. ISSN 0966-9582.
Go to original source... - OSMAN, C.-C., GHIRAN, A.-M. 2019. When Industry 4.0 meets Process Mining. Procedia Computer Science, 2019, vol. 159, pp. 2130-2136. ISSN 1877-0509.
Go to original source... - OSTERTAGOVA, E., OSTERTAG, O., KOVÁČ, J. 2014. Methodology and Application of the Kruskal-Wallis Test. Applied Mechanics and Materials, 2014, vol. 611, pp. 115-120. ISSN 1662-7482.
Go to original source... - OWALLA, B., GHERHES, C., VORLEY, T., BROOKS, C. 2022. Mapping SME productivity research: a systematic review of empirical evidence and future research agenda. Small Business Economics, 2022, vol. 58, no. 3, pp. 1285-1307. ISSN 0921-898X.
Go to original source... - PAGE, L., SCHODER, J. 2019. Making change last: leadership is the key. Journal of Business Strategy, 2019, vol. 40, no. 2, pp. 32-41. ISSN 0275-6668.
Go to original source... - PARAMITHA, T. A., TOBING, D. K., SUROSO, I. 2020. ADKAR Model to Manage Organizational Change. International Journal of Research Science and Management, 2020, vol. 7, no. 1, pp. 141-149. ISSN 2349-5197.
- PECH, M., VANĚČEK, D. 2022. Barriers of new technology introduction and disadvantages of industry 4.0 for industrial enterprises. Serbian Journal of Management, 2022, vol. 17, no. 1, pp. 197-206. ISSN 1452-4864.
Go to original source... - PEJIC-BACH, M., BERTONCEL, T., MEŠKO, M., KRSTIĆ, Ž. 2020. Text mining of industry 4.0 job advertisements. International Journal of Information Management, 2020, vol. 50, pp. 416-431. ISSN 0268-4012.
Go to original source... - PEROTTI, S., BASTIDAS SANTACRUZ, R. F., BREMER, P., BEER, J. E. 2022. Logistics 4.0 in warehousing: a conceptual framework of influencing factors, benefits and barriers. The International Journal of Logistics Management, 2022, vol. 33, no. 5, pp. 193-220. ISSN 0957-4093.
Go to original source... - PHILLIPS, J., KLEIN, J. D. 2023. Change Management: From Theory to Practice. TechTrend, 2023, vol. 67, no. 1, pp. 189-197. ISSN 8756-3894.
Go to original source... - POLYANSKA, A., ZAPUKHLIAK, I., DIUK, O. 2019. Culture of organization in conditions of changes as an ability of efficient transformations: the case of gas transportation companies in Ukraine. Oeconomia Copernicana, 2019, vol. 10, no. 3, pp. 561-580. ISSN 2353-1827.
Go to original source... - PONCE-ESPINOSA, G. E., ESPINOZA TORRES, D. L., RIOS ZARUMA, J. A., TAPIA CARREÑO, K. G. 2017. Capacidades organizacionales generadoras de valor: análisis del sector industrial. Retos, 2017, vol. 7, no. 13, pp. 143-162. ISSN 1390-8618.
Go to original source... - PREDIŞCAN, M., ROIBAN, R. N. 2014. The Main Forces Driving Change in the Romanian SME's. Procedia - Social and Behavioral Sciences, 2014, vol. 124, pp. 236-245. ISSN 1877-0428.
Go to original source... - QUINTERO, D. T. M. 2023. Contribution of change management Principles to Human Resource Management in Educational Organizations. Ciencia Latina Revista Científica Multidisciplinar, 2023, vol. 7, no. 6, pp. 1754-1776. ISSN 2707-2215.
Go to original source... - RA, S., SHRESTHA, U., KHATIWADA, S., YOON, S. W., KWON, K. 2019. The rise of technology and impact on skills. International Journal of Training Research, 2019, vol. 17, no. sup1, pp. 26-40. ISSN 1448-0220.
Go to original source... - RACZYŃSKA, M. 2019. Definition of Micro, Small and Medium Enterprise under the Guidelines of the European Union. Review of Economic and Business Studies, 2019, vol. 12, no. 2, pp. 165-190. ISSN 1843-763X.
Go to original source... - RAD, F. F., OGHAZI, P., PALMIÉ, M., CHIRUMALLA, K., PASHKEVICH, N., et al. 2022. Industry 4.0 and supply chain performance: A systematic literature review of the benefits, challenges, and critical success factors of 11 core technologies. Industrial Marketing Management, 2022, vol. 105, pp. 268-293. ISSN 0019-8501.
Go to original source... - RADDI-MIRA, L. H., PECORA JUNIOR, J. E., DESCHAMPS, F. 2024. Framework for Implementing Industry 4.0 Projects. Sustainability, 2024, vol. 16, no. 6, Article 2387. ISSN 2071-1050.
Go to original source... - RAI, R., TIWARI, M. K., IVANOV, D., DOLGUI, A. 2021. Machine learning in manufacturing and industry 4.0 applications. International Journal of Production Research, 2021, vol 59, no. 16, pp. 4773-4778. ISSN 0020-7543.
Go to original source... - RAJ, A., DWIVEDI, G., SHARMA, A., DE SOUSA JABBOUR, A.B.L., RAJAK. S. 2020. Barriers to the adoption of industry 4.0 technologies in the manufacturing sector: An inter-country comparative perspective. International Journal of Production Economics, 2020, vol. 224, Article 107546. ISSN 1873-7579.
Go to original source... - RAMADAN, M., AMER, T., SALAH, B., RUZAYQAT, M. 2022. The Impact of Integration of Industry 4.0 and Internal Organizational Forces on Sustaining Competitive Advantages and Achieving Strategic Objectives. Sustainability, 2022, vol. 14, no. 10, Article 5841. ISSN 2071-1050.
Go to original source... - RAMOS, P. N., ENTERIA, M. L. B., NORONA, M. I. 2021. Readiness Model Development in the Adoption of Internet of Things (IoT) among Philippine Manufacturing SMEs Using Force Field Analysis Approach and Structural Equation Modelling. In Proceedings of the International Conference on Industrial Engineering and Operations Management. IEOM Society International, 2021. pp. 2178-2190. ISBN 978-1-7923-6127-2.
- REIS, M., GINS, G. 2017. Industrial Process Monitoring in the Big Data/Industry 4.0 Era: from Detection, to Diagnosis, to Prognosis. Processes, 2017, vol. 5, no. 3, Article 35. ISSN 2227-9717.
Go to original source... - REMNELAND WIKHAMN, B. 2020. Open innovation change agents in large firms: how open innovation is enacted in paradoxical settings. R&D Management, 2020, vol. 50, no. 2, pp. 198-211. ISSN 0033-6807.
Go to original source... - RIBEIRO, J., LIMA, R., ECKHARDT, T., PAIVA, S. 2021. Robotic Process Automation and Artificial Intelligence in Industry 4.0 - A Literature review. Procedia Computer Science, 2021, vol. 181, pp. 51-58. ISSN 1877-0509.
Go to original source... - RIKALOVIĆ, A., SUZIĆ, N., BAJIĆ, B., PIURI, V. 2022. Industry 4.0 Implementation Challenges and Opportunities: A Technological Perspective. IEEE Systems Journal, 2022, vol. 16, no. 2, pp. 2797-2810. ISSN 1932-8184.
Go to original source... - ROBBINS, S. P., COULTER, M. K. 2005. Management. 8th ed. New Jersey: Pearson Prentice Hall, 2005. 608 p. ISBN 978-0131439948.
- SALGADO, M., DE CASTO MARTÍNEZ, M. V., MARTÍNEZ, E. M., LÓPEZ-SANZ, M., MARTÍN-PEŇA, M. L. 2022. Driving organisational change in SMEs using service design. Journal of Service Theory and Practice, 2022, vol. 32, no. 5, pp. 701-736. ISSN 2055-6225.
Go to original source... - SALUNKHE, O., BERGLUND, Å. F. 2022. Industry 4.0 enabling technologies for increasing operational flexibility in final assembly. International Journal of Industrial Engineering and Management, 2022, vol. 13, no. 1, pp. 38-48. ISSN 2217-2661.
Go to original source... - SAMUELS, P. 2017. Advice on Exploratory Factor Analysis. Birmingham City University: Centre for Academic Success, 2017, 7 pp. Available at: https://www.researchgate.net/publication/304490328_Advice_on_Exploratory_Factor_Analysis [Accessed 2025, July 04].
- SARASWATHI, S., DEEPA, G., VENNILA, G., PARTHASARATHY, S., RAMADOSS, B. 2022. A Survey on Big Data: Infrastructure, Analytics, Visualisation and Applications. International Journal of Industrial Engineering: Theory, Applications and Practice, 2022, vol. 29, no. 5. ISSN 1943-670X.
- SAVOLAINEN, S. 2016. Could Acceptance Predict Commitment in Organisational Change? Impact of Changes Caused by Succession From the Viewpoint of Non-family Employees in Small Family Firms. Management Studies, 2016, vol. 4, no. 5, pp. 197-215. ISSN 2328-2185.
Go to original source... - SCHULTE, T., BOHNET-JOSCHKO, S. 2022. How can Big Data Analytics Support People-Centred and Integrated Health Services: A Scoping Review. International Journal of Integrated Care, 2022, vol. 22 no. 2, pp. 1-18. ISSN 1568-4156.
Go to original source... - SELICATI, V., CARDINALE, N. 2021. The Benefits in Coupling Exergy Analysis and Life Cycle Assessment in the Context of Sustainable Manufacturing for Industry 4.0: A Real Industrial Case. International Journal of Heat and Technology, 2021, vol. 39, no. 1, pp. 12-22. ISSN 0392-8764.
Go to original source... - SEREY, J., ALFARO, M., FUERTES, G., VARGAS, M., TERNERO, R., et al. 2023. Framework for the Strategic Adoption of Industry 4.0: A Focus on Intelligent Systems. Processes, 2023, vol. 11, no. 10, Article 2973. ISSN 2227-9717.
Go to original source... - SHEIKH HAMDO, S. 2021. Change Management Models: A Comparative Review. Academic Paper, 2021.
- SHOOLIN, J. S. 2017. Change Management - Recommendations for Successful Electronic Medical Records Implementation. Applied Clinical Informatics, 2017, vol. 01, no. 03, pp. 286-292. ISSN 1869-0327.
Go to original source... - SHRESTHA, N. 2021. Factor Analysis as a Tool for Survey Analysis. American Journal of Applied Mathematics and Statistics, 2021, vol. 9, no. 1, pp. 4-11. ISSN 2328-7306.
Go to original source... - SHY, Y., MILLS, L. G. 2010. A Critical New Pathway Towards Change in Abusive Relationships: The Theory of Transition Framework. Clinical Social Work Journal, 2010, vol. 38, no. 4, pp. 418-425. ISSN 0091-1674.
Go to original source... - SIMONETTO, M., SGARBOSSA, F., BATTINI, D., GOVINDAN, K. 2022. Closed loop supply chains 4.0: From risks to benefits through advanced technologies. A literature review and research agenda. International Journal of Production Economics, 2022, vol. 253, Article 108582. ISSN 0925-5273.
Go to original source... - SNYDER, H. 2019. Literature review as a research methodology: An overview and guidelines. Journal of Business Research, 2019, vol. 104, pp. 333-339. ISSN 0148-2963.
Go to original source... - SOMMER, L. 2015. Industrial revolution - industry 4.0: Are German manufacturing SMEs the first victims of this revolution? Journal of Industrial Engineering and Management, 2015, vol. 8, no. 5, pp. 1512-1532. ISSN 2013-0953.
Go to original source... - SONG, W., JACOBSEN, H.-A. 2018. Static and Dynamic Process Change. IEEE Transactions on Services Computing, 2018, vol. 11, no. 1, pp. 215-231. ISSN 1939-1374.
Go to original source... - SOOMRO, M. A., HIZAM-HANAFIAH, M., ABDULLAH, N. L., ALI, M. H., JUSOH, M. S. 2021. Embracing Industry 4.0: Empirical Insights from Malaysia. Informatics, 2021, vol. 8, no. 2, Article 30. ISSN 2227-9709.
Go to original source... - STEIN, V., SCHOLZ, T. M. 2020. Manufacturing Revolution Boosts People Issues: The Evolutionary Need for 'Human-Automation Resource Management' in Smart Factories. European Management Review, 2020, vol. 17, no. 2, pp. 391-406. ISSN 1740-4754.
Go to original source... - STOJKOVIC, M., BUTT, J. 2022. Industry 4.0 Implementation Framework for the Composite Manufacturing Industry. Journal of Composites Science, 2022, vol. 6, no. 9, Article 258. ISSN 2504-477X.
Go to original source... - STRAKOVÁ, J., TALÍŘ, M., ŠKODA, M., JAMBAL, T. 2024. Implementing changes: the case of Czech companies. Journal of Competitiveness, 2024, vol. 16, no. 1, pp. 207-223. ISSN 1804-1728.
- SULEIMAN, Z., SHAIKHOLLA, S., DIKHANBAYEVA, D., SHEHAB, E., TURKYILMAZ, A., et al. 2022. Industry 4.0: Clustering of concepts and characteristics. Cogent Engineering, 2022, vol. 9, no. 1., Article 2034264. ISSN 2331-1916.
Go to original source... - SULISTIYANI, E., ALI, A. H. N., ASTUTI, H. M. 2020. Change Management Strategies to Implement A Fingerprint Based Attendance System in Information Systems Department Using ADKAR Model. Applied Technology and Computing Science Journal, 2020, vol. 3, no. 1, pp. 22-29. ISSN 2621-4458.
Go to original source... - TAVAKOL, M., DENNICK, R. 2011. Making sense of Cronbach's alpha. International Journal of Medical Education, 2011, vol. 2, pp. 53-55. ISSN 2042-6372.
Go to original source... - TRSTENJAK, M., COSIC, P. 2017. Process Planning in Industry 4.0 Environment. Procedia Manufacturing, 2017, vol. 11, pp. 1744-1750. ISSN 2351-9789.
Go to original source... - TUPA, J., STEINER, F. 2019. Industry 4.0 and business process management. Tehnički glasnik, 2019, vol. 13, no. 4, pp. 349-355. ISSN 1848-5588.
Go to original source... - TURNER, C. J., TIWARI, A., OLAIYA, R., XU, Y. 2012. Process mining: from theory to practice. Business Process Management Journal, 2012, vol. 18, no. 3, pp. 493-512. ISSN 1463-7154.
Go to original source... - VARGA, J. 2021. Defining the Economic Role and Benefits of Micro, Small and Medium-sized Enterprises in the 21st Century with a Systematic Review of the Literature. Acta Polytechnica Hungarica, 2021, vol. 18, no. 11, pp. 209-228. ISSN 1785-8860.
Go to original source... - WEIHRICH, H., KOONTZ, H. 2004. Management: A Global Perspective. 11th ed. McGraw-Hill Education (Asia), 2004. 640 p. ISBN 978-0071239462.
- WENTWORTH, D. K., BEHSON, S. J., KELLEY, C. L. 2020. Implementing a new student evaluation of teaching system using the Kotter change model. Studies in Higher Education, 2020, vol. 45, no. 3, pp. 511-523. ISSN 0307-5079.
Go to original source... - WIGHTMAN, P., GARCIA, L., SALAZAR, A., LANDAZURY, F. 2023. Digital transformation, Industry 4.0, and extended reality: A Case for an Innovation Cycle. IEEE Potentials, 2023, vol. 42, no. 4, pp. 8-16. ISSN 0278-6648.
Go to original source... - WILHELM, S., RODEHORST-WEBER, T. K., LONGORIA, A. 2020. Transitioning From a Traditional to a Concept-Based Curriculum: Faculty's Experience. Nursing Education Perspectives, 2020, vol. 41, no. 6, pp. 355-357. ISSN 1943-4685.
Go to original source... - WIŚNIEWSKI, J. W. 2022. The Possibilities of the use of the Spearman Correlation Coefficient. WayScience, 2022, vol. 5, no. 1, pp. 151-165. ISSN 2664-4819.
- WORTMANN, F., FLÜCHTER, K. 2015. Internet of Things. Business & Information Systems Engineering, 2015, vol. 57, no. 3, pp. 221-224. ISSN 2363-7005.
Go to original source... - WU, J., PING, L., GE, X., WANG, Y., FU, J. 2010. Cloud Storage as the Infrastructure of Cloud Computing. In Proceedings of the 2010 International Conference on Intelligent Computing and Cognitive Informatics. Washington: IEEE Computer Society, 2010. pp. 380-383. ISBN 978-1-4244-6640-5.
Go to original source... - XU, X., LU, Y., VOGEL-HEUSER, B., WANG, L. 2021. Industry 4.0 and Industry 5.0-Inception, conception and perception. Journal of Manufacturing Systems, 2021, vol. 61, pp. 530-535. ISSN 0278-6125.
Go to original source... - ZUBAC, A., DASBOROUGH, M. HUGHES, K., JIANG, Z., KIRKPATRICK, S., MARTINSONS, M.G., TUCKER, D., ZWIAKEL, O. 2021. The strategy and change interface: understanding "enabling" processes and cognitions. Management Decision, 2021, vol. 59, no. 3, pp. 481-505. ISSN 0025-1747.
Go to original source...
This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.

